Removing a FlexibleLOM from your HPE Server
Looking to remove, replace or upgrade your server's FlexibleLOM? We have put together this guide and short video to help you with the process of removing your FlexibleLOM from your HPE server.

What is a FlexibleLOM?

A flexibleLOM is a chip, or set of chips, that allow network connection within HPE ProLiant servers. LOM stands for LAN-On-Motherboard and acts as a network interface card for HPE servers. 
 
In this video we remove a FlexibleLOM from a HPE DL380 G9 server, however, this process can be repeated on most HPE servers in generation 7 and above. Follow the steps below or watch our short video for a visual demonstration.
 

Removing a FlexibleLOM:

  • Power down the server to protect the equipment and yourself from damage and harm.
  • Loosen the screws of the PCI riser and lift to remove.
  • Loosen the screws on the FlexibleLOM and gently pull the card down until it is released from the slot. Take care with this as you don't want to damage the equipment.
  • Replace the PCI riser by sliding it into position and pushing it down into place.
  • Secure the PCI riser in place by tightening the screws to hold it in place.

If you are replacing or upgrading your FlexibleLOM component, you may want to watch our FlexibleLOM insert video here. For more information on the FlexibleLOM or any other server component, get in touch with our team of experts.
 

Techbuyer Refurbished Server Components 

Techbuyer offers an extensive range of refurbished server components, allowing you to sustainably upgrade your servers. Each component we supply comes with a three-year warranty for your peace of mind, as well as unrivalled technical support from our expert team. 

The components and devices we supply are refurbished to a high standard, meaning that they perform just as well as new, ensuring that you receive the performance you expect whilst making the sustainable choice for your IT equipment. Find out more about IT sustainability here.